The following is an introduction to 1/2 Hose Mender Soft Coated, I hope to help you better understand 1/2 Hose Mender Soft Coated. Welcome new and old customers to continue to cooperate with us to create a better future together!
TPR (thermoplastic rubber) repair joint is a fitting used for connecting and repairing pipes such as water pipes and hoses. It is made of TPR material and has excellent elasticity, wear resistance, aging resistance and corrosion resistance, and can effectively solve the problem of water leakage at the pipe connection. 1/2 Hose Mender Soft Coated specifically refers to the repair joint with an interface size of 1/2 inch.
Product Specifications:
| Product Name: | 1/2 Hose Mender Soft Coated |
| Material: | ABS+TPR+PP |
| Parameters (cm): | 5.5*3.5 |
| Weight: | 24g |
| Number of boxes: | 300 |
| Packaging: | Suction card |
| Box size (cm): | 50X37X37 |
Product Features:
The TPR material used in 1/2 Hose Mender Soft Coated has good elasticity and can adapt to the slight deformation of the pipe caused by temperature changes, water pressure fluctuations and other factors, and maintain the tightness of the connection. TPR material has good resistance to a variety of chemicals and wear, which can extend the service life of the repair joint. The repair joint is designed with a quick connection mechanism. No complicated tools and equipment are required for installation. It can be completed with simple operations. The special sealing structure inside the repair joint can ensure that the connection is leak-free and improve the safety of the pipeline system.
Product Application:
1/2 Hose Mender Soft Coated is widely used in pipeline systems in the fields of home, garden, agriculture, etc., especially suitable for the following scenarios:
1. Repair and modification of household water pipe systems.
2. Connection and repair of garden irrigation systems.
3. Installation and maintenance of agricultural sprinkler systems.
Precautions:
When installing 1/2 Hose Mender Soft Coated, pay attention to the following points:
1. Turn off the water source: Turn off the water source before installation to avoid water leakage during installation.
2. Clean the pipe: Wipe the pipe connection with a clean cloth to ensure that there are no impurities and moisture.
3. Correct installation: Install the repair joint correctly according to the product manual or the guidance of professionals to ensure that the connection is tight and leak-free.
4. Check the effect: After the installation is completed, turn on the water source to check whether the connection is leaking. If there is any leakage, it should be handled in time.
